Stratasys H550

Bigger parts. Higher throughput. Lower cost per part.
Meet higher production demands with the Stratasys® H550™ powder bed fusion 3D printer. Print larger parts, or more parts per build, with consistent quality.

 

Stratasys H550

Larger end-use parts and higher-volume production for a wide range of industrial applications.

Specifications

Build dimensions (xyz) 365 x 208 x 450 mm (14.30 x 8.18 x 17.71 in)
Build volume 34.2 l (9.03 gal)
Layer thickness 100 µm (0.004 in)
Full build time SAF PA12: 16.5 hours
Materials SAF PA12 powder, Stratasys HAF™ High Absorption Fluid
Printer dimensions (W x D x H) 1900 x 940 x 1730 mm
Printer weight 825 kg
Power 400 VAC, 3P+N, PE, 50-60 Hz, 16 A
Consumption 3.25 kW (5 kW peak, 0.15 kW idle)
Operating environment 20-25 °C, 40-55% RH
Extraction 300 m³/h, with adjustable damper
Software GrabCAD Print Pro™, GrabCAD Print Server, GrabCAD Streamline Pro, Materialise Magics, Siemens NX, PTC Creo
Download PDF

Stratasys H550 SAF 3D printer - grote productieonderdelen

Large production parts

Produce larger ducts, housings, enclosures, covers, and structural components without tooling. Parts can be up to 40% longer than on the H350. Applications that did not fit before now fit in one build.

Stratasys H550 SAF 3D printer - onderdelen voor drones en UAV's

Drone and UAV components

Lightweight UAV structures, ducting, brackets, and housings. Complex parts with integrated features, made in one piece.

Stratasys H550 SAF 3D printer - jigs, fixtures en end-of-arm tooling

Jigs, fixtures, and end-of-arm tooling

Durable jigs, fixtures, and manufacturing aids without traditional tooling. Lightweight end-of-arm tools with optimized geometries. Print larger tools, or several components in a single build.

Stratasys H550 SAF 3D printer - productielijn

More parts per build

More than 2x the parts per build and up to 50% higher throughput than the H350. A full SAF PA12 build takes about 16.5 hours. Predictable build times make production planning simple, even when nest density changes.

Stratasys H550 SAF 3D printer - printkoppen en thermische controle

Industrial printheads and thermal control

Industrial-grade printheads deliver precise fluid control, without routine printhead replacement. Distributed heating and thermal sensing keep conditions consistent. The result: repeatable part quality across large parts, smal

Stratasys H550 SAF 3D printer - PowderEase T2 poederbeheer

Automated powder handling with PowderEase T2

PowderEase T2 automates breakout, powder retrieval, sieving, and dosing. One station supports up to six H550 systems running the same material. Total operator time stays under 30 minutes per build. The T2 also handles H350 builds in the same material, so the H550 fits into your existing SAF workflow.

Stratasys H550 SAF 3D printer - productievloer

Lower cost per part

The H550 is designed to deliver up to 30% lower total cost of ownership than any comparable print-and-fuse system available today. Its 450 mm long axis is 20% longer than the leading comparable print-and-fuse system. And time to part is faster than with comparable SLS systems.

Typical applications

Large Production Parts

Produce larger ducts, housings, enclosures, covers, and structural components without tooling. Parts up to 40% longer than on the H350 open up applications that didn't fit before.

Orthotics and Prosthetics

Manufacture customized ankle-foot orthoses, prosthetic sockets, forearm orthoses, and other larger patient-specific devices at production scale.

Drone and UAV Components

Create lightweight UAV structures, ducting, brackets, housings, and other complex components with integrated features and application-specific geometries.

Industrial and Automotive Tooling

Produce lightweight, application-specific end-of-arm tools with optimized geometries that can improve ergonomics and robotic performance.

Jigs and Fixtures

Create durable jigs, fixtures, and manufacturing aids without traditional tooling, with greater capacity for larger tools or multiple components in a single build.