Case study - U.S. Air Force
Case study
U.S. Air Force: C-17 lavatory parts printed at the point of need
USA · Defense · FDM (F900; ASA, ULTEM 9085 resin, Antero 800NA)
The 911th Maintenance Squadron (Pittsburgh) and the 60th Maintenance Squadron (Travis Air Force Base) support the C-17 Globemaster III fleet.
The challenge
C-17 lavatory parts face harsh chemicals and must seal reliably. Some parts could no longer be sourced. The units needed a durable, repeatable replacement route that passes engineering and airworthiness approval.
The solution
Pittsburgh made the lavatory toilet base. Travis made the lavatory floor pan. Both used the Stratasys F900 and a stepped approach: prototypes in ASA, test-fit parts in ULTEM 9085 resin and final parts in Antero 800NA for chemical resistance. The C-17 System Program Office approved the final designs.
The results
- Drip pan cost from about $10,000 to about $1,200: 88% lower, about $8,800 saved per pan
- Printed within 60 hours instead of weeks of downtime
- A validated replacement for a toilet base that could no longer be bought
Application: Legacy & obsolete defense parts
Reverse engineer unavailable parts and keep qualified CAD files for repeat production.
More about production & end-use parts
Source: Stratasys Application Guide and Stratasys case material. Photo: Stratasys.
Want to explore this application?
SEIDO Systems is Stratasys Platinum Partner across Benelux, France and the Nordics. Contact us for advice, a demo or a test print.